QC/T 744-2006 Translated English of Chinese Standard. (QCT 744-2006, QC/T744-2006, QCT744-2006): Nickel-metal hydride batteries for electric vehicleshttps://www.chinesestandard.net, 2019/02/16 - 27 ページ This Standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of sealed nickel-metal hydride batteries for electric vehicles. This Standard applies to the sealed nickel-metal hydride batteries for electric vehicles with a nominal voltage of 1.2V for cell (n is the number of batteries) for module. |
目次
| 5 | |
Scope | 6 |
Classification | 7 |
Test methods | 10 |
Inspection rules | 19 |
Marking packaging transportation and storage | 20 |
Annex A Normative Consistency analysis method | 23 |
Annex B Normative Test steps of simple simulation conditions | 25 |
多く使われている語句
20°C discharge performance 20°C rate discharge actual capacity article number batteries for electric battery is charged battery is discharged battery is stored battery is subjected battery is tested battery shall comply calculated capacity in A·h catalytic converter charged according Consistency analysis method Constant-current discharge 1I3 current of 1I3 current value cut-off voltage 1.0V cycle dimensions and quality discharge 9I3 18 discharge cut-off voltage discharge time data electric vehicles energy density battery exit-factory inspection explode or ignite fan clutch high energy density high power density high temperature charge left for 1h module is charged module is required module is subjected module is tested module shall comply nickel-metal hydride batteries Outline dimensions power density battery Product provisions of 5.1.9 QC/T rate discharge performance rated capacity rated value required to consist simple simulation conditions specified in Table Standard deviation coefficient stored at 20°C temperature charge retention test in accordance Type inspection Vibration resistance voltmeter