Electrostatic Accelerators: Fundamentals and ApplicationsRagnar Hellborg Springer Science & Business Media, 2005/11/02 - 620 ページ Electrostatic accelerators are an important and widespread subgroup within the broad spectrum of modern, large particle acceleration devices. They are specifically designed for applications that require high-quality ion beams in terms of energy stability and emittance at comparatively low energies (a few MeV). Their ability to accelerate virtually any kind of ion over a continuously tunable range of energies makes them a highly versatile tool for investigations in many research fields including, but not limited to, atomic and nuclear spectroscopy, heavy ion reactions, accelerator mass spectroscopy as well as ion-beam analysis and modification. The book is divided into three parts. The first part concisely introduces the field of accelerator technology and techniques that emphasize their major modern applications. The second part treats the electrostatic accelerator per se: its construction and operational principles as well as its maintenance. The third part covers all relevant applications in which electrostatic accelerators are the preferred tool for accelerator-based investigations. Since some topics are common to all types of accelerators, Electrostatic Accelerators will also be of value for those more familiar with other types of accelerators. |
この書籍内から
検索結果1-5 / 39
... charging system consisting of an insulating belt or a metal chain. Several other types of accelerators are also discussed in some detail. Many topics are of course common to all types of accelerators, for example ion sources, vacuum ...
... charging , in which a mechanical system carries the charge to the high - voltage terminal ( these accelerators are called electrostatic accelerators ) . An open - air acceler- ator fails above a few MV , mainly because of the moisture ...
... charging system is described in Chap . 6 , and a photo of one of Van de Graaff's first open - air machines is shown ... Charge is sprayed from sharp corona points onto the moving belt . The belt conveys the charge to the insulated high ...
... charging system, resistors and gradient control, the acceleration tube, vacuum, stripping, and ion sources. Operational consid- erations such as beam diagnostics and safety are also discussed. It cannot be pretended that this part is ...
書籍の閲覧制限を超えています.
目次
3 | |
43 | |
Electrostatics | 64 |
Calculation Technique for HighVoltage Equipment | 84 |
Development of Charging Belts in Russia | 101 |
Voltage Distribution Systems Resistors | 110 |
Accelerator Tubes | 123 |
Development of Tubes | 147 |
Nonradiation Hazards and Safety Considerations | 365 |
ElectrostaticAccelerator FreeElectron Lasers | 378 |
Introduction to Part III Research Fields | 392 |
Roberts T E Barnhart R J Nickles 395 | 413 |
Corradi | 429 |
Detection of Explosives and Other Threats | 445 |
Accelerator Mass Spectrometry | 461 |
Atomic Collisions in Matter | 486 |
Stripper Systems | 166 |
Charge Exchange and Electron Stripping | 181 |
NegativeIon Formation Processes | 222 |
Tandem Terminal Ion Source | 274 |
Beam Envelope Techniques for IonOptical Calculations | 299 |
Equipment for Beam Diagnostics | 317 |
Radiation Protection at an Accelerator Laboratory | 337 |
Modification of Materials | 508 |
Ion Beam Analysis | 530 |
Atomic Structure | 560 |
Industrial Electron Accelerators | 581 |
Electrostatic Accelerators Production | 595 |
Index | 608 |